LOCTITE PC 7202 is a two-part epoxy chocking system It is
recommended for the installation of main engines and other
equipment. Its high compressive strength withstands
maximum loads Typical applications include installation of main
engines, drive engines, winches, hoists, and deck mounted
equipment.

LOCTITE® SF 7070 is a non-aqueous, hydrocarbon based,
non-CFC solvent designed for cleaning and degreasing of
surfaces to be bonded with LOCTITE® adhesives. The product
is used as a final pre-assembly cleaning treatment to remove
most greases, oils, lubrication fluids, metal cuttings and fines
from surfaces to be bondedIt is designed to be used as a spray
or in immersion cleaning processes at room temperature or
heated.
Registered to NSF Category K1 for use as a cleaner and
degreaser in non-food processing areas which are used to
remove oil, wax, resinous materials, or other substances not
removable by using acidic or alkaline cleaning agents.

LOCTITE SF 7800 provides a corrosion protective coating
at room temperature on ferrous metals. Typical applications
include touching up metal parts after welding and to provide
long-term protection of metal assemblies. It is also used to
restore protection to repaired galvanized parts (e.g. crash
barriers, tubes, flanges, tanks, panels, etc.). This
product is typically used in applications with an operating range
of -50 °C to +550 °C.

LOCTITE® PC 7319™ is designed to protect equipment and
concrete against extreme corrosion caused by chemical
exposure, especially to sulfuric acid. LOCTITE® PC 7319™
forms a glossy, low friction surface under typical service
temperatures of -30 to 120 °C. Typical applications include
coating equipment to prevent corrosion, line tanks and
chutes, chemical containment areas, concrete pits, tanks,
floors and foundations.

LOCTITE® EA 3478™ is a two-part ferro-silicon filled, 100% solid
epoxy resin system. It is ideal for restoring parts worn by mechanical
impact and/or corrosion. Typical applications are restoring
tolerances to worn shafts, repairing worn keyways, repairing
damaged housings, filling pitted surfaces in worn machinery, and
restoring fit to bearing housings.

LOCTITE® LB 8023™ features a formulation that protects
assemblies exposed to direct or indirect fresh or salt water and
high humidity conditions. Typical marine applications include
bolts, screws, studs, pipe joints, nuts, shafts, bushings, splines,
chains, and cables. Other applications include pulp and paper
mills, water and waste water treatment plants, and dressing for
water pump gaskets and flanges. This product is typically
used in applications with an operating range of -29 °C to
+1315 °C.

LOCTITE® LB 8023™ features a formulation that protects
assemblies exposed to direct or indirect fresh or salt water and
high humidity conditions. Typical marine applications include
bolts, screws, studs, pipe joints, nuts, shafts, bushings, splines,
chains, and cables. Other applications include pulp and paper
mills, water and waste water treatment plants, and dressing for
water pump gaskets and flanges. This product is typically
used in applications with an operating range of -29 °C to
+1315 °C.